Introduction of ABS Recycled Material


Release time:

2021-03-18

The molding characteristics of ABS recycled materials: amorphous materials, medium fluidity, high moisture absorption, must be fully dried. Plastic parts with a shiny surface should be preheated and dried 80-90 degrees for 3 hours. ABS recycled materials should use higher material temperature and mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature> 270 degrees). For high-precision plastic parts, the mold temperature should be 50-60 degrees, and for high-gloss, high-heat-resistant plastic parts, the mold temperature should be 60-80 degrees. If you need to solve the problem of water pinch, you need to improve the fluidity of the material, use high material temperature, high mold temperature, or

ABS recycled materialMolding characteristics: amorphous material, medium fluidity, high moisture absorption, must be fully dried. Plastic parts with a shiny surface should be preheated and dried 80-90 degrees for 3 hours.
ABS recycled materials should use higher material temperature and mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature> 270 degrees). For high-precision plastic parts, the mold temperature should be 50-60 degrees, and for high-gloss, high-heat-resistant plastic parts, the mold temperature should be 60-80 degrees.
If you need to solve the problem of water clamping, you need to improve the fluidity of the material, use high material temperature, high mold temperature, or change the water level.


ABS再生料


If a heat-resistant or flame-retardant material is formed, the plastic decomposition products will remain on the surface of the mold after 3-7 days of production, causing the surface of the mold to shine. The mold should be cleaned in time, and the exhaust position should be added to the surface of the mold.
ABS recycled materials are usually produced by recycling chemical products. Through some processing methods, a variety of corresponding products are produced, and the nature of ABS recycled materials is different, so the use of ABS recycled materials can produce different products. More and more users are using recycled materials, and plastic product manufacturers are increasingly using ABS recycled materials.
PP granule manufacturersTell you, ABS recycled material process:
ABS recycled materials are more like computer cases, TV cases, instrument cases, car panels, and decorative materials. They should be separated, especially electroplating and painting colors.PP plastic granulesAlso need attention.
Chemical treatment, deplating and paint stripping, but deplating and paint stripping must be careful. Because there is a certain proportion of chemical liquid, it is necessary to use protective equipment and containers, otherwise it will cause injuries and other incidents.
Clean the water tank, then dry, color matching or put accessories to improve quality.
A special extruder is used for granulation, but a filter screen must be placed, but the filter screen should be placed according to product requirements.
There are cold water granulation and air-cooled granulation, the granulation standard is 3X4mm, and then the packaging standard.







Copyright©2023 Dongguan huazuan plastic material Co., Ltd. All Rights Reserved

绿美佳塑胶