Characteristics of ABS Recycled Materials


Release time:

2021-03-29

The molding characteristics of ABS recycled materials: amorphous materials with medium activity and high hygroscopicity must be fully dried, and plastic parts with bright surfaces must be preheated and dried at 80-90 degrees for 3 hours. ABS recycled materials should use higher material temperature and mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature> 270 degrees). For high-precision plastic parts, the mold temperature should be 50-60 degrees, and for high-gloss, high-heat-resistant plastic parts, the mold temperature should be 60-80 degrees.

ABS recycled materialThe molding characteristics:
Amorphous materials with medium activity and high hygroscopicity must be fully dried, and plastic parts with bright surfaces must be preheated and dried at 80-90 degrees for 3 hours. ABS recycled materials should use higher material temperature and mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature> 270 degrees). For high-precision plastic parts, the mold temperature should be 50-60 degrees, and for high-gloss, high-heat-resistant plastic parts, the mold temperature should be 60-80 degrees.
If you need to solve the problem of water clamping, you need to improve the activity of the material, adopt high material temperature, high mold temperature, or change the water level.


HIPS再生料


If a heat-resistant or flame-retardant material is formed, the plastic decomposition products will remain on the surface of the mold after 3-7 days of production, causing the surface of the mold to shine. It is necessary to clean the mold in time and increase the exhaust position of the mold surface.
The use of ABS recycled material:
Recycled materials (ABS regenerants) are usually produced by recycling chemical products. Through some processing methods, a variety of corresponding products are produced, and the nature of recycled materials (ABS recycled materials) is different, so different products can be manufactured using recycled materials. More and more users are using recycled materials, and manufacturers of plastic products are increasingly using recycled materials (ABS recycled materials).HIPS recycled materialThere are also many uses.
PP granule manufacturersTell you the process of ABS recycled material:
ABS recycled materials are more like computer cases, TV cases, instrument cases, car panels, and decorative materials. They should be separated, especially electroplating and painting colors. Chemical treatment, deplating and paint stripping, but deplating and paint stripping must be careful. Because there is a certain proportion of chemical liquid, it is necessary to use protective equipment and containers, otherwise it will cause injuries and other incidents.
Clean the water tank, then dry, color matching or put accessories to improve quality. A special extruder is used for granulation, but a filter screen must be placed, but the filter screen should be placed according to product requirements. There are cold water granulation and air-cooled granulation, the granulation standard is 3X4mm, and then the packaging standard.
Hello! Welcome to the official website of Dongguan Huazuan Plastic Material Co., Ltd.
Address: No. 78, Qiaoli Beimen Industrial Zone, changping town, Dongguan City
Tel: 86 0769 82020719
Mobile Phone: 13802397965
Fax: 86 0769 82308699










Copyright©2023 Dongguan huazuan plastic material Co., Ltd. All Rights Reserved

绿美佳塑胶